一区二区三区免费-在线观看免费观看在线-久久久久久综合-主人性调教le百合sm-涩涩久久-夜夜看av-午夜三级视频-制服丝袜一区二区三区-亚洲精品女人-超碰98在线观看-亚洲视频久久久-午夜av一区-亚洲操操-黑名单上的人全集免费观看-欧美日韩不卡合集视频-国产人久久人人人人爽-久久你懂的-一二三不卡视频-欧美性成人-日本美女逼

網站首頁 ＞ 產品展示 ＞ 奧拓尼克斯Autonics ＞ 傳感器 ＞ BS5系列Aotonics微型光電傳感器
Aotonics微型光電傳感器

Aotonics微型光電傳感器

產品型號： BS5系列

所屬分類：傳感器

更新時間：2026-06-08

簡要描述：微型光電傳感器
微型光電傳感器BS5系列，接插式接線方式方便接線，具有多種不同的外形（K,T,L,Y,V型）,便于安裝。采用寬范圍電源電壓，易于連接各種IC,繼電器，PLC等。發光器/接收器窗口采用防塵保護設計，信賴度更高，可在較差的環境下使用。

詳細說明：

主要特性
* 超小型,內置放大器,NPN集電極開路輸出
* 多種型號(K,T,L,Y,V型)適用于多種不同應用場合
* 通過控制線可選擇Light ON/Dark ON模式
* 高速響應頻率: 2kHz
* 寬電源電壓范圍: 5-24VDC
 (易于連接不同的IC,繼電器,可編程控制器)
* 發射端/接收端窗口防塵保護設計
* 紅色指示燈可指示動作狀態
* 通過連接頭接插方式連接

應用場合
* 適用于小型高精密機械:LCD半導體設備,圖像檢測系統和運送裝置執行機構
* 適用于設定調色板位置,計算數量和檢測旋轉體的起始位置

 

型號說明

規格表 


ModelNPN open collector outputBS5-K2MBS5-T2MBS5-L2MBS5-Y2MBS5-V2M
PNP open collector outputBS5-K2M-PBS5-T2M-PBS5-L2M-PBS5-Y2M-PBS5-V2M-P
Sensing distance5mm fixed
Sensing typeThrough-beam(Not modulated)
Sensing target?0.8×2mm Opaque materials
Hysteresis0.05mm
Response timeLight ON : Max. 20?, Dark ON : Max. 100?
Response frequency2kHz(refer to the measuring range of frequency response)
Power supply5-24VDC ±10%(Ripple P-P : Max. 10%)
Current consumptionMax. 30mA(at 26.4VDC )
Light sourceInfrared LED(950nm)
Operation modeLight ON / Dark ON selectable by control wire
Control outputNPN or PNP open collector output
? Load voltage : Max. 30VDC  ? Load current : Max. 100mA  ? Residual voltage : Max. 1.2V
Protection circuitReverse power polarity protection, Overcurrent protection
IndicatorOperation Indicator: red LED
ConnectionConnector type
Noise resistance±240V the square wave noise(pulse width:1?) by the noise simulator
Insulation resistanceMin. 20MΩ(at 250VDC megger)
Dielectric strength1,000VAC 50/60Hz for 1 minute
Light sourceInfrared LED(950nm)
Vibration1.5mm or 300m/s2 amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 2 hours
Shock500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times
Environ- mentAmbient illuminationFluorescent lamp : Max. 1000? (Receiver illumination)
Ambient temperature-20 to 55℃, storage : -25 to 85℃
Ambient humidity35 to 85%RH, storage : 35 to 85%RH
ProtectionIP50(IEC standard)
MaterialPBT
ApprovalCE
Unit weightApprox. 30g
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.

注意事項
1.浪涌
BS5系列未設置抗浪涌回路
使用時請注意遵守EN標準
2.外部光源
該產品未設置防止外部光源干擾回路,請將接收器遠離外部光源干擾
3.布接方式
和動力線、高壓線等分開布線,以避免由此造成的誤動作或產品損壞
4.干擾發生源注意事項
若微型光電傳感器周圍有機器產生干擾(開關穩壓器,電機等),請將機器的屏蔽線F.G接地
5.焊接(直接焊在端子上)
直接焊接在端子上時不要超過3秒(zui大溫度260℃).確認焊接時離端子根部1.5mm以上.
6.安裝
使用M3螺釘擰緊(zui大力矩0.49N·m(5.0kgf·cm).擰螺釘時,請使用墊片(Φ6).請確認光電傳感器收發光部分不與任何其他物體接觸.若該部分劃損時,產品會發生誤動作.
7.維護
若傳感器安裝在有許多灰塵或潮濕的環境中,請注意清潔接收器,用干布擦干發射器和接收器，沾染灰塵會發生誤動作
8.其他
安裝傳感器時遠離:
易腐蝕性氣體,油,灰塵,水蒸汽,強酸強堿,強光

※請注意遵守上述說明以避免發生誤動作或損壞產品

注意安全


Major Features
* Microminiature, built-in amplifier, NPN open collector output
* Various applications available with diverse line up(K, T, L, Y, V types)
* Light ON/Dark ON mode selectable via control terminal
* High-speed response frequency : 2kHz
* Wide range of power supply : 5-24VDC
(Easy to connect with various ICs, relays, programmable controllers)
* Dust resistance structure protected by emitter/receiver window
* Red LED for operation indication
* Easy connection through optional connector sockets/cables

Application Fields
* Applicable to small high precision machines including LCD, semiconductor facilities, vision systems and actuator conveyer.
* Suitable for determining palette position, counting coins and detecting rotator’s starting point

Ordering Information



Specification Table

ModelNPN open collector outputBS5-K2MBS5-T2MBS5-L2MBS5-Y2MBS5-V2M
PNP open collector outputBS5-K2M-PBS5-T2M-PBS5-L2M-PBS5-Y2M-PBS5-V2M-P
Sensing distance5mm fixed
Sensing typeThrough-beam(Not modulated)
Sensing target?0.8×2mm Opaque materials
Hysteresis0.05mm
Response timeLight ON : Max. 20?, Dark ON : Max. 100?
Response frequency2kHz(refer to the measuring range of frequency response)
Power supply5-24VDC ±10%(Ripple P-P : Max. 10%)
Current consumptionMax. 30mA(at 26.4VDC )
Light sourceInfrared LED(950nm)
Operation modeLight ON / Dark ON selectable by control wire
Control outputNPN or PNP open collector output
? Load voltage : Max. 30VDC  ? Load current : Max. 100mA  ? Residual voltage : Max. 1.2V
Protection circuitReverse power polarity protection, Overcurrent protection
IndicatorOperation Indicator: red LED
ConnectionConnector type
Noise resistance±240V the square wave noise(pulse width:1?) by the noise simulator
Insulation resistanceMin. 20MΩ(at 250VDC megger)
Dielectric strength1,000VAC 50/60Hz for 1 minute
Light sourceInfrared LED(950nm)
Vibration1.5mm or 300m/s2 amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 2 hours
Shock500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times
Environ- mentAmbient illuminationFluorescent lamp : Max. 1000? (Receiver illumination)
Ambient temperature-20 to 55℃, storage : -25 to 85℃
Ambient humidity35 to 85%RH, storage : 35 to 85%RH
ProtectionIP50(IEC standard)
MaterialPBT
ApprovalCE
Unit weightApprox. 30g
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
 
User's Guide
 

Caution for your safety


留言框

  • 產品：

  • 您的單位：

  • 您的姓名：

  • 聯系電話：

  • 常用郵箱：

  • 省份：

  • 詳細地址：

  • 補充說明：

  • 驗證碼：

    請輸入計算結果（填寫阿拉伯數字），如：三加四=7